User guide

3-97

Cisco Transport Manager Release 9.2 GateWay/CORBA User Guide and Programmer Manual

OL-20937-01

Chapter 3 Using CTM GateWay/CORBA Interfaces

3.8.14 setAdditionalInfo

inout globaldefs::NVSList_T additionalInfo)

raises(globaldefs::ProcessingFailureException);

Description

This interface sets attributes using the additionalInfo structure. This interface is supported only for:

• Physical termination point (PTP)

• Cards and NE types listed in the following table

This interface is also supported for the attribute LinkIntegrityTimer for the cards and the NE types listed

in the following table.

This interface is also supported for the attribute LinkIntegrityTimer for the cards and the NE types listed

in the following table.

For CE-100T-8, CE-MR-6, and CE-MR-10 cards, the LinkIntegrityTimer attribute value cannot be set

to 0.

For G1000_4 and CE-1000-4 cards, the LinkIntegrityTimer attribute value cannot be set to 0 if the

LinkIntegrityDisable attribute is set to false.

For G1000_4 and CE-1000-4 cards, the LinkIntegrityTimer attribute value must be set to 0 if the

LinkIntegrityDisable attribute is set to true.

For G1000_4 and CE-1000-4 cards, the LinkIntegrityDisable attribute can be set only to true or false.

This operation returns a list of modified attributes with the new related values applied.

Card ONS 15310 CL ONS 15310 MA SONET ONS 15310 MA SDH ONS 15454 SONET ONS 15454 SDH

G1000_4 X X

CE-1000-4 X X

CE-100T-8 X X X X X

CE-MR-10 X X