User guide

3-65
Cisco Transport Manager Release 9.2 GateWay/CORBA User Guide and Programmer Manual
OL-20937-01
Chapter 3 Using CTM GateWay/CORBA Interfaces
3.6.3 getAllSupportedPTPs
• string owner
– Not supported.
• globaldefs::NamingAttributes_T ingressTrafficDescriptorName
– Not supported.
• globaldefs::NamingAttributes_T egressTrafficDescriptorName
– Not supported.
• TPType_T type
– Supported. CTM supports TPT_PTP, TPT_CTP, and TPT_FTP.
• TPConnectionState_T connectionState
– Supported. For PTP, it is TPCS_NA; for CTP and floating termination point (FTP), it is
TPCS_BI_CONNECTED.
• TerminationMode_T tpMappingMode
– Not supported.
• Directionality_T direction
– Supported. PTPs always report D_BIDIRECTIONAL. For the ONS 155xx, D_SOURCE and
D_SINK are also supported.
• transmissionParameters::LayeredParameterList_T transmissionParams
– Supported. Layer rate is supported for PTP, CTP, and FTP.
CTM supports the following parameters for PTP.
TP
Type NE Type Valid Values Supporting Equipment and Restrictions
AlarmReporting
PTP ONS 15310 CL
ONS 15310 MA
ONS 15327
ONS 15454 SONET
ONS 15454 SDH
ONS 15600 SONET
ONS 15600 SDH
On, Off All equipment (except equipment that
does not have PTP, such as XC, TCC2,
CXC, and so on).
ServiceState
PTP ONS 15310 CL
ONS 15310 MA
ONS 15327
ONS 15454 SONET
ONS 15454 SDH
ONS 15600 SONET
ONS 15600 SDH
— All equipment (except ML and CE cards,
FCMR, and the equipment that does not
have PTP, such as XC, TCC2, and so on).