User guide
3-56
Cisco Transport Manager Release 9.2 GateWay/CORBA User Guide and Programmer Manual
OL-20937-01
Chapter 3 Using CTM GateWay/CORBA Interfaces
3.6.1 getAllEquipment
The EqList parameter contains a sequence of the EquipmentOrHolder_T data type, which is defined as
the union of Equipment_T and EquipmentHolder_T.
CTM support for Equipment_T is as follows:
• globaldefs::NamingAttributes_T name
–
Supported. This field has four tuples. The first tuple is for EMS, the second is for
ManagedElement, the third is for EquipmentHolder, and the fourth contains equipment. The
value of the fourth tuple is the same as the value in the nativeEMSName field.
• string userLabel
–
Not supported.
• string nativeEMSName
–
Supported. The naming convention is described in 2.2.5.7 Equipment Holder, page 2-35.
• string owner
–
Not supported.
• boolean alarmReportingIndicator
–
Supported for ONS 15327 and ONS 15454 only.
• ServiceState_T serviceState
–
Not supported.
• EquipmentObjectType_T expectedEquipmentObjectType
–
MGX 8880/8850/8830—All values listed in Table D-1 on page D-2 are supported.
–
ONS 15216—All values listed in Table D-2 on page D-3 are supported.
–
ONS 15305 and ONS 15305 CTC—All values listed in Table D-3 on page D-4 and Table D-4
on page D-4 are supported.
–
ONS 15310 CL—All values listed in Table D-5 on page D-5 are supported.
–
ONS 15310 MA SDH—All values listed in Table D-6 on page D-5 are supported.
–
ONS 15310 MA SONET—All values listed in Table D-7 on page D-5 are supported.
–
ONS 15327—All values listed in Table D-8 on page D-6 are supported.
–
ONS 15454 SDH—All values listed in Table D-9 on page D-6 are supported.
–
ONS 15454 SONET—All values listed in Table D-10 on page D-9 are supported.
–
ONS 15530—All values listed in Table D-11 on page D-13 are supported.
–
ONS 15540—All values listed in Table D-12 on page D-26 and Table D-13 on page D-32 are
supported.
–
ONS 15600 SDH—All values listed in Table D-14 on page D-35 are supported.
–
ONS 15600 SONET—All values listed in Table D-15 on page D-35 are supported.
• EquipmentObjectType_T installedEquipmentObjectType
–
Supported. The value reported by the NE is inserted in this field.
• string installedPartNumber
–
Supported when equipment is installed.
• string installedVersion
–
Supported when equipment is installed.