User guide
3-28
Cisco Transport Manager Release 9.2 GateWay/CORBA User Guide and Programmer Manual
OL-20937-01
Chapter 3 Using CTM GateWay/CORBA Interfaces
3.3.8 createTopologicalLink
–
CTM supports CD_BI for bidirectional links.
–
CTM supports CD_UNI for unidirectional links.
• transmissionParameters::LayerRate_T rate. For a list of supported layer rates, see 2.2.1 Layer Rate,
page 2-23.
• globaldefs::NamingAttributes_T aEndTP
–
Supported.
• globaldefs::NamingAttributes_T zEndTP
–
Supported.
• globaldefs::NVSList_T additionalCreationInfo
–
Supported. The supported parameters are listed in the following table.
• globaldefs::sSrlgGroupList_T srlgGroupListValue
–
Supported. This field holds the shared risk link group (SRLG) group values. This is an optional
parameter. You can include the SRLG group during link creation. A maximum of five SRLG
groups are supported for a given link. SRLG groups are only supported for SONET/SDH
topological links.
To create unidirectional OTS links without side between 80WXC cards on the ONS15454 NEs, specify
the parameter zEndSecSrc as secondary source and the parameter aEndSecDst as destination TP in the
additionalCreationInfo list.
A End PTP
[0] name = EMS value = Cisco Systems/CTM
[1] name = ManagedElement value = 15454-ANSI-68-9
[2] name = PTP value
=/rack=1/shelf=1/slot=15/port=12
Z End PTP
[0] name = EMS value = Cisco Systems/CTM
[1] name = ManagedElement value = 15454-ANSI-68-8
[2] name = PTP value =
/rack=1/shelf=1/slot=13/port=13
Additional CreationInfo
Managed Element Type Parameter Name Supported Parameter Values
All managed elements that support topological links linkProtectionType PROT_ONE_PLUS_ONE.
All managed elements that support topological links linkCost Integer, 0 to 999999.
All managed elements that support topological links provType MANUAL (default value) and PATCHCORD.
All managed elements that support topological links zEndSecSrc A string that represents a sequence of
namevalue pairs for the TMF physical location
of a PTP. A semicolon (;) is used as separator.
Format:
name='EMS';value='Cisco
Systems/CTM';name='ManagedElement';value
='15454-ANSI-68-8';name='PTP';value='/ra
ck=1/shelf=1/slot=15/port=10'
All managed elements that support topological links aEndSecDst A string that represents a sequence of
namevalue pairs for the TMF physical location
of a PTP. A semicolon (;) is used as separator.