Technical information
Table Of Contents
- 1 What is TL1?
- 2 TL1 Message Types and Examples
- 3 Connect to TL1
- 4 Log Into TL1
- 5 Command Actions and Categories
- 6 Ten Basic Commands
- 7 Log Out of TL1
- 8 Obtaining Documentation
- 9 Documentation Feedback
- 10 Cisco Product Security Overview
- 11 Obtaining Technical Assistance
- 12 Obtaining Additional Publications and Information
16
Input Example:
RTRV-ALM-OC12:ELDRIDGE:FAC-5-1:225::MN,SD,SA;
Response Format:
SID DATE TIME
M CTAG COMPLD
“<AID>,[<AIDTYPE>]:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,[<OCRDAT>],
[<OCRTM>],,:[<DESC>]”
;
• AID shows the port in question.
• AIDTYPE shows the type of the port.
• NTFCNCDE is the 2-letter notification code. Values are CL (cleared), CR (critical), MJ (major),
MN (minor), NA (not alarmed), and NR (not reported).
• CONDTYPE is the type of alarm condition.
• SRVEFF is the effect on service caused by the alarm condition. Values are NSA (not service
affecting) or SA (service affecting).
• OCRDAT is the date when the specific event or violation occurred.
• OCRTM is the time when the specific event or violation occurred.
• DESC is a condition description.
Response Example:
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“FAC-5-1,OC12:MJ,SD,SA,09-05,12-30-20,,:\“BER AT SIGNAL DEGRADE LEVEL\”,”
;