Datasheet

vii
CiscoSecure ACS 2.3 for UNIX User Guide
78-5222-02 Rev. A0
Check System Requirements
Basic Installation Procedures
• Solaris 2.6, or Solaris 2.5.1 with patches (see “Solaris 2.5.1 Patches,” page xiv for special
instructions concerning Solaris 2.5.1)
Note To check your version of Solaris, enter the Solaris command uname -a. If the system returns
5.5.1, Solaris 2.5.1 is installed. If the system returns 5.6, Solaris 2.6 is installed.
Note To support the RADIUS tunneling feature of CiscoSecure ACS 2.3(5), the Sun Ultra 1or
compatible workstation must be running Solaris 2.6.
CiscoSecure NAS Requirements
CiscoSecure ACS works with the following network access servers (NASes):
• Cisco routers (models AS5100 through AS5800 and AS2509 through AS2512) running Cisco IOS
software (Release 11.2 or later)
• Selected routers not running Cisco IOS software, running RADIUS protocols conforming to IETF
RADIUS, specifically RFCs 2138 and 2139.
Note To support the RADIUS tunneling feature of CiscoSecure ACS 2.3(5), the AAA server must
be running Cisco IOS Release 12.0(5)T or another vendor's NAS software that supports
RADIUS tunneling attributes.
CiscoSecure Workstation Console Requirements
The web-browser-based CiscoSecure ACS workstation console requires the following hardware and
software:
• Pentium 90 or faster PC, or an UltraSPARC or better workstation
• 32 MB of RAM on a PC
• SVGA display with resolution of 1024 x 768 or higher
• Minimum 1 MB of video RAM (2 MB recommended)
• 17-inch or larger monitor recommended
• One of the following web browsers:
– Netscape Communicator (version 4.5, 4.51, 4.6, 4.61, or 4.7 on Windows 95 or NT; version 4.5,
4.51, 4.6, 4.61, or 4.7 on Solaris 2.5.1 or 2.6)
– Internet Explorer (version 4.01 or 5.0 on Windows 95 or NT)
Note The browser must be enabled for Java and Java Script.