Datasheet

xiii
CiscoSecure ACS 2.3 for UNIX User Guide
78-5222-02 Rev. A0
If You Licensed and Installed CiscoSecure with DSM, Enable DSM
Basic Installation Procedures
After starting CiscoSecure ACS, access the CiscoSecure Administrator web site to perform some initial
configuration:
Note If you do not have access to the CiscoSecure Administrator web site, you can enable the DSM module
by carefully editing the CSU.cfg and CSConfig.ini files. See “Editing Configuration Files to Enable or
Disable the DSM Module,” page xxx.
Step 1 From a Windows 95 or Windows NT workstation, start your Netscape Navigator or Microsoft Internet
Explorer web browser and enter the following URL:
http:// your_server /cs
where your_server is the host name (or the fully qualified domain name, FDQN, if host name and FDQN
differ) of the Ultra 1 workstation where you installed CiscoSecure ACS. You can also substitute the Ultra
1 workstation’s IP address for your_server.
Note If the security socket layer feature on your browser is enabled, specify “https” rather than “http”
as the hypertext transmission protocol. Enter: https://your_server/cs
Step 2 When the CiscoSecure Logon window appears, enter the superuser name and password and click
Submit. The default superuser name and password in a new CiscoSecure ACS installation are:
username: superuser
password: changeme
Step 3 In the CiscoSecure Administrator web site menu bar, click AAA and then click General.
Step 4 In the AAA > General web page locate the Max Sessions Enabled field and select the Distributed
option. This is the option that enables the full set of Distributed Session Manager features on
CiscoSecure ACS.
Step 5 For this setting to take effect, you must stop and restart CiscoSecure ACS.
• Log in as [Root] to the Ultra 1 workstation where you installed CiscoSecure ACS. To stop
CiscoSecure ACS, enter:
# /etc/rc0.d/K80CiscoSecure
• To restart CiscoSecure ACS, enter:
# /etc/rc2.d/S80CiscoSecure
Step 6 Confirm that Oracle or Sybase database replication is set up and enabled between your CiscoSecure
database sites. For details, see the chapter “Setting Up Database Replication Among
CiscoSecure ACSes” in the CiscoSecure ACS 2.3 for UNIX User Guide.
Step 7 Confirm that AAA accounting functions are enabled on all client NASes. For details, see the chapter
“CiscoSecure ACS Accounting” in the CiscoSecure ACS 2.3 for UNIX User Guide.