Datasheet

CiscoSecure ACS 2.3 for UNIX User Guide

78-5222-02 Rev. A0

Prepare Your Answers to the Installation Questions

Basic Installation Procedures

• IP Address to use for CiscoSecure. ______________________

The default is the primary IP address of the server on which you are installing the CiscoSecure ACS.

For single server installation, use the default; otherwise, specify the address of the first ACS.

• Enter the AAA Server License Key. ______________________

Specify the software license key code that you received from Cisco.

• If the host name of this server is not the same as its fully qualified domain name (FQDN), enter the

FQDN. ____________________________________

Specify the FQDN of the Ultra 1 workstation where you are installing the ACS only if the FQDN is

different from the host name; otherwise, accept the default (host name) value for this prompt.

• Enter the TACACS+ NAS name you will be using. ___________________________

To support TACACS+ enabled NAS(es), either specify the host name of one such NAS, or indicate

that any NAS with a specified TACACS+ secret key will be using CiscoSecure ACS.

When you run the install program, pressing Enter for this prompt’s default selection, none, supports

any NAS with a specified TACACS+ secret key.

• Enter the TACACS+ NAS secret key. ____________________

If you intend to support TACACS+ enabled NAS(es), specify a secret TACACS+ key string.

• Select the token card(s) to use or none: (1. CRYPTOCard, 2. Secure Computing, 3. Security

Dynamics, Inc.) __________________

If you want to support one of the listed Token Cards, specify the card you want to support.

Note Selecting Security Dynamics, Inc. requires that the SDI client software be properly installed

before the ACS is started.

–

[If Secure Computing] Do you want to use CiscoSecure’s SafeWord GUI Software (Y/N)?

____________________________

This feature requires local root read/write file access to the SafeWord directory.

–

[If Secure Computing] Enter the directory path for the SafeWord Software.

_____________________________

Enable SafeWord’s IMPORT/EXPORT option in the Secure Computing SafeWord application

program.

–

[If Secure Computing] Enter the IP address of the Secure Computing server.

______________________________