Specifications

2-27
Cisco Content Services Switch Getting Started Guide
OL-6711-01
Chapter 2 Configuring CSS Basics
Synchronizing the CSS with an SNTP Server
Showing SNTP Configuration Information
To display the SNTP configuration information on the CSS, enter the show sntp
global command. For example:
(config)# show sntp global
Table 2-3 describes the fields in the show sntp global command output.
Table 2-3 Field Descriptions for the show sntp global Command
Field Description
Server Whether the server is configured as a primary or
secondary server.
Server Address The IP address for the SNTP server. This field also
indicate whether the server is configured as a primary
or secondary server.
Version The version number of the server. The default is 1.
Poll Interval The time in seconds between SNTP request messages.
The range is 16 to 16284. The default is 64.
TimeSinceLastUpdate The time in seconds since the last server reply.
Server Status The operating status of the SNTP server, UP or
DOWN. After the CSS fails to connect to the SNTP
server three consecutive times, the CSS marks the
SNTP state as DOWN.