Specifications

2-23
Cisco Content Services Switch Getting Started Guide
OL-6711-01
Chapter 2 Configuring CSS Basics
Showing the Date and Time
TimeZone The configured name of the time zone and the time offset
from an SNTP server. When daylight savings time (DST)
is configured, the configured DST timezone name is
displayed during DST.
An offset with all zeros (00:00:00) indicates that no
offset was configured for the time zone. A negative
symbol (–) indicates a negative offset to the UTC (for
example, -05:-23:+00). A positive symbol (+) indicates a
positive offset to the UTC (for example, +12:+00:+00).
When DST is configured, this field also provides
information in brackets that displays the DST recurring
or date configuration settings. During DST, the
configured name for the time zone, and the start date and
time for standard time are displayed. When standard time
is in effect, the configured name for the DST time zone,
and its start date and time are displayed.
Summer Time The three-letter configured name of the time zone when
you configure DST. Disabled indicates that the CSS is
not configured for DST.
Change The number of minutes added to the time for DST. By
default, the offset is 60.
Added The current DST configuration when the clock
transitions to DST.
Removed The current DST configuration when the clock
transitions to standard time.
Table 2-2 Field Descriptions for the show clock Command (continued)
Field Description