Specifications

Chapter 2 Configuring CSS Basics
Showing the Date and Time
2-22
Cisco Content Services Switch Getting Started Guide
OL-6711-01
Disabling DST on the CSS
To disable DST on the CSS, the default behavior, use the no clock summer-time
command. For example, enter:
# no clock summer-time
Showing the Date and Time
Use the show clock command to display the current date and time. For example:
# show clock
Table 2-2 describes the fields in the show clock command output.
Table 2-2 Field Descriptions for the show clock Command
Field Description
Date Configured date in the format of month, day, and year
(mm-dd-yyyy); for example, the date June 15th 2005
appears as 06-15-2005.
If you use the date european-date command, the format
is day, month, and year (dd-mm-yyyy). For example, the
date June 15th 2005 appears as 15-06-2005.
Time Configured time in the format of hour, minute, and
second (hh:mm:ss); for example, 16:23:45.
If you configure an SNTP server, the show clock
command displays the time adjusted with the time zone
offset. The show clock command displays the UTC time
from the SNTP server. If you configure a time zone, the
show clock command displays the time adjusted with the
time zone offset. For example, if the UTC time from the
server is 16:30:43 and you configure a time zone negative
offset of 5 hours and 30 minutes (–05:-30:+00), the
displayed time becomes 11:00:43.