Specifications

1-9
Cisco Content Services Switch Getting Started Guide
OL-6711-01
Chapter 1 Booting, Logging In, and Getting Started
Logging in to the CSS
If an error occurs during a power-on self-test, the console displays an error
message, increments the detected error counter, and continues to the next test until
the CSS completes all of the power-on self tests. See Appendix A,
Troubleshooting the Boot Process, for more information on boot errors and
messages.
Logging in to the CSS
After the CSS completes the boot process, it displays the login banner, copyright,
and login prompt.
When a startup-config file is present, the CSS displays the message:
Press
CTRL-C to abort running the startup-config
4. The CSS 11501, or a module in the CSS 11503
or CSS 11506, is on line and active.
Green Solid
The CSS 11501 or a module in the CSS 11503 or
CSS 11506 (except a Fast Ethernet Module)
failed.
In the CSS 11503 or 11506, if:
• A Fast Ethernet Module fails, all of the Link
and Duplex LEDs blink simultaneously.
• The master SCM in slot 1 detects a module
failure, its Status LED is green and blinks
slowly.
• The master SCM in slot 1 fails, the CSS does
not boot unless there is a passive SCM in
slot 2.
Red Blinking
5. Disk activity Green Variable
blinking
Table 1-2 Status LEDs Boot Definitions (continued)
State Sequence LED Color LED State