Technical information

13
b. The security certificate must be accepted to run CWI. You have the following options:
– Click Yes to trust and accept the security certificate for this router session only. If this option is chosen, the
certificate is accepted and the login process continues. Proceed to Step 9.
– Click No to deny the security certificate. If this option is chosen, the login process is canceled.
– Click Always to automatically trust and accept the security certificate in this section and all subsequent CWI
sessions. If this option is chosen, the certificate is accepted and the login process continues. Proceed to Step 8.
– Click More Details to view the security certificate. A dialog box appears with detailed certificate information.
The certificate information includes the version, serial number, insurer, and start and end date validity of the
certificate.
If applicable, the Craft Works Interface Launcher appears.
Step 8 If this is the first time you have started the CWI or if you have installed a new version of the CWI, the CWI components
will start downloading. Otherwise, a cached version of the CWI components are used, reducing the CWI start time.
After the CWI component download is complete, the Start CWI, Delete Cache, and About buttons become available.
Step 9 Log in to the router when the CWI - Login dialog box appears (see Figure 2).
Note Enter the same AAA usernameand password that youused in Step 4 to access the router that must be configured.
See the “Router Prerequisites” section on page 7.
a. Enter the same AAA username that you used in Step 4 in the User Name field. See the “CWI Login Information
Requirements” section on page 11 for information on obtaining your username.
b. Enter the same AAA password that you used in Step 4 in the Password field. See the “CWI Login Information
Requirements” section on page 11 for information on obtaining your password.
c. Choose one of the following connection types from the drop-down menu:
Note CWI can autodetectwhether the routeris configured insecure or nonsecuremode and willtry the differentstandard
ports as necessary.
– XML over CORBA. Choose the Node Name.
– CLI over Telnet/SSH. Choose the ServerName/Port. If you specify a port, CWI will try only to connect using
that port. CWI will not automatically try to connect with other ports.
– Terminal Server. Choose the ServerName/Port.
– Serial Port. Choose the Serial Port. You can also set the parameters for the serial port.
d. (Optional) In the Node Name list, click the drop-down arrow and choose a node name (DNS name or IP address of the
router).
e. Click Login.
Figure 2 CWI - Login Dialog Box
Step 10 Observe the dynamic display that shows each initialization step and indicates whether each step is successful.