User's Guide

1-4
Cisco CSS UCS Platform Series User Guide, CPS-UCS-1RU-K9 / CPS-UCS-2RU-K9
Chapter 1 Overview
System Overview
Cisco Connected Safety and Security UCS C220 Rear Panel
Figure 1-2 shows the rear panel features of the server.
Figure 1-2 Cisco Connected Safety and Security UCS C220 Server Rear Panel Features
PSU1PSU1 PSU2PSU2PSU1 PSU2
PCIe2
PCIe1
4 5 6 98
2 31
7
331683
1 Power supplies (up to two) 6 1-Gb Ethernet dedicated management port
Note The CIMC can be accessed only
through the 1Gb Ethernet dedicated
management port.
2 Low-profile PCIe slot 2 on riser
(half-height, half-length, x8 lane)
Note The low-profile slots are not
supported in the Cisco Connected
Safety and Security UCS C220
(CPS-UCS-1RU-K9)
7 Dual 1-Gb Ethernet ports
(LAN1 and LAN2)
Note The LAN Ethernet posts are referred
to as “Eth 0” and “Eth1” in the Cisco
Connected Safety and Security
applications, such as Cisco Video
Surveillance.
3 Standard-profile PCIe slot on riser
(full-height, half-length, x16 lane)
8 USB ports
4 VGA video connector 9 Rear Identification button/LED
5 Serial port (RJ-45 connector) –
Tip See the “Cisco Connected Safety and Security UCS C220 LEDs and Buttons” section on page 1-10 for
more information.
Summary of Cisco Connected Safety and Security UCS C220 Server Features
Table 1-2 lists the features of the server.
.
Ta b l e 1-2 Cisco Connected Safety and Security UCS C220 Server Features
Chassis One rack-unit (1RU) chassis.
Processors A single Intel Xeon E5-2600 Series processor is supported.
CPU2 and associated DIMMs are not supported.