User Manual

Switch Between Calls on Same Line
Procedure
Step 1
Press Swap to switch between two calls on the same line.
Step 2
If there are more than two calls on the line, select a call from the call list and press Resume.
Create Conference with Two Calls on Same Line
Procedure
Step 1
With two connected calls on the same line, select a call to make it the active call.
The second call is put on hold.
Step 2
Press Conference.
Step 3
Press Calls to view the call list and select the caller to add to the conference.
Step 4
Wait for the call to connect.
Step 5
Press Conference to add the participant to your call.
The conference begins.
Step 6
(Optional) Repeat to add additional participants.
Transfer Two Calls on Same Line
Before You Begin
You must be on an active call to transfer calls.
Procedure
Step 1
Press Transfer.
Step 2
Enter phone number or press a speed-dial button for the transfer destination.
When you have reached the maximum number of calls for your line, pressing Transfer allows you to select
the calls from a list of calls on the line.
Step 3
Wait for the recipient to answer.
Step 4
Press Transfer again.
Cisco Unified IP Conference Phone 8831 and 8831NR User Guide for Cisco Unified Communications Manager
10.0
66
Calling Features
Switch Between Calls on Same Line