User Manual
Table Of Contents
- Cisco Unified IP Conference Phone 8831 and 8831NR User Guide for Cisco Unified Communications Manager 10.0
- Contents
- Preface
- Features of Your Cisco Unified IP Conference Phone
- Applications
- Contacts
- Messages
- Calling Features
- Softkey Feature Map
- Answer
- Call Back
- Call Forward
- Call Park
- Call Pickup
- cBarge
- Conference
- Divert
- Do Not Disturb
- Enhanced Room Coverage
- Cisco Extension Mobility
- Hold
- Hold Reversion
- Meet Me Conference
- Mobile Connect
- Monitoring and Recording
- Multiple Calls per Line
- Mute
- On-Hook Dialing
- Plus Dialing
- Privacy
- Quality Reporting Tool
- Redial
- Shared Lines
- Speed Dial
- Transfer
- Cisco WebDialer
- Sign In to the Cisco Unified Communications Self Care Portal
- Additional Options
- Troubleshooting
- Cisco One-Year Limited Hardware Warranty Terms
•
When you answer the call on one remote destination, the other remote destinations and the conference
station stop ringing, disconnect, and a missed call message displays on the other remote destinations.
Enable Mobile Connect
Procedure
Step 1
Press More.
Step 2
Press Mobility to display the current remote destination status (Enabled or Disabled).
Step 3
Press Select to change the status.
Step 4
Press Exit.
Switch IP Phone Call to Mobile Phone
Procedure
Step 1
Press More.
Step 2
Press Mobility.
Step 3
Select To mobile.
Step 4
Answer the in-progress call on your mobile phone.
You cannot use the conference station for any other calls while this call is still in progress.
The Call button LED lights solid red, and the calling party number displays on the phone.
Switch Mobile Call to IP Phone
Procedure
Step 1
Press Call on the conference station.
Step 2
Hang up the call on your mobile phone to disconnect the mobile phone, but not the call.
Step 3
Press Resume on the conference station within 5 to 10 seconds and start talking on the conference station.
Cisco Unified IP Conference Phone 8831 and 8831NR User Guide for Cisco Unified Communications Manager
10.0
64
Calling Features
Enable Mobile Connect