User Manual

The Meet Me conference begins when the host connects. Participants who call the conference before the host
has joined hear a busy tone and must dial again.
The conference ends when all participants hang up; the conference does not automatically end when the
host disconnects.
Note
Host Meet Me Conference
Procedure
Step 1
Obtain a Meet Me phone number from your system administrator.
Step 2
Distribute the Meet Me phone number to participants.
Step 3
When you are ready to start the meeting, press MeetMe.
You may need to press More first.
Step 4
Dial the Meet Me phone number.
Join Meet Me Conference
Procedure
Step 1
Dial the Meet Me phone number provided by the conference host.
Step 2
If you hear a busy tone, the host has not yet joined the conference. In this case, disconnect and try your call
again.
Mobile Connect
Mobile Connect allows you to use your mobile phone to handle calls associated with the conference station
phone number.
To set up Mobile Connect, use the Cisco Unified Communications Manager Self Care Portal to set up remote
destinations and create access lists to allow or block calls from specific phone numbers from being passed to
the remote destinations.
When you enable Mobile Connect:
•
The conference station and remote destinations receive calls simultaneously.
•
When you answer the call on the conference station, the remote destinations stop ringing, disconnect,
and display a missed call message.
Cisco Unified IP Conference Phone 8831 and 8831NR User Guide for Cisco Unified Communications Manager 10.0
63
Calling Features
Host Meet Me Conference