User Manual

Procedure
Step 1
Choose Applications > Admin Settings > Wireless Microphones.
Step 2
Select either Wireless Microphone 1 or Wireless Microphone 2.
If the selected channel is paired, the Unpair softkey displays.
Step 3
Press Unpair.
A verification prompt with the options to Cancel or Unpair displays.
Step 4
Press Unpair to continue to unpair the microphone.
The microphone channel's registration information in the base deletes. If you view the microphone channel's
status in phone info menu, the status value and RFID are empty.
Step 5
Press return to revert to the wireless microphones menu and stop the process.
Related Topics
Pair Wireless Microphone, on page 59
Cisco Extension Mobility
Cisco Extension Mobility allows you to temporarily configure a Cisco Unified IP Phone or Conference Station
to use as your own. After you log in to Extension Mobility, the new device adopts your user profile, features,
established services, and web-based settings. Your system administrator must configure Extension Mobility
for you.
The Cisco Extension Mobility ChangePIN feature allows you to change your PIN from your Cisco Unified
IP Phone.
Note
•
Extension Mobility automatically logs you out after a certain amount of time. Your system
administrator establishes this time limit.
•
Changes that you make to your Extension Mobility profile from Cisco Unified Communications
Manager Self Care Portal take effect immediately if you are logged in to Extension Mobility on the
physical device; otherwise, changes take effect the next time you log in.
•
Changes that you make to a phone or conference station from Cisco Unified Communications
Manager Self Care Portal take effect immediately if you are logged out of Extension Mobility;
otherwise, changes take effect after you log out.
•
Local settings controlled by the phone are not maintained in your Extension Mobility profile.
Cisco Unified IP Conference Phone 8831 and 8831NR User Guide for Cisco Unified Communications Manager
10.0
60
Calling Features
Cisco Extension Mobility