User Manual

Table Of Contents

Related Topics

Linked Mode, on page 33

Pair Wireless Microphone

Before You Begin

The microphone must be in the off state before you can pair it to the conference station. A microphone is off

if the microphone's LED is off. To turn off the wireless microphone, hold down the microphone button until

the microphone LED turns solid red, then release.

Procedure

Step 1

Choose Apps > Admin Settings > Wireless Microphones.

Step 2

Select either Wireless Microphone 1 or Wireless Microphone 2.

If the selected channel is available, a Pair microphone 1? or Pair microphone 2? prompt displays,

and the Pair softkey displays.

If a microphone is already linked to a particular channel, pairing cannot be initiated on the selected channel

and the dialog shows that the microphone is linked.

Step 3

Press Pair.

If the channel is ready to pair, the pairing process begins and a text message displays.

Step 4

Put the microphone that corresponds to the selected channel in pairing mode by pressing the microphone's

Mute button until the LED lights solid red.

If pairing succeeds, the screen reverts to the Wireless Microphones Menu, and the message Mic X Paired

Successfully! displays.

If pairing times out or fails, the status is updated and you can cancel or retry.

Step 5

Press Cancel to revert to the Wireless Microphones Menu.

Step 6

Press Retry to start the pairing process again.