User Manual
Table Of Contents
- Cisco Unified IP Conference Phone 8831 and 8831NR User Guide for Cisco Unified Communications Manager 10.0
- Contents
- Preface
- Features of Your Cisco Unified IP Conference Phone
- Applications
- Contacts
- Messages
- Calling Features
- Softkey Feature Map
- Answer
- Call Back
- Call Forward
- Call Park
- Call Pickup
- cBarge
- Conference
- Divert
- Do Not Disturb
- Enhanced Room Coverage
- Cisco Extension Mobility
- Hold
- Hold Reversion
- Meet Me Conference
- Mobile Connect
- Monitoring and Recording
- Multiple Calls per Line
- Mute
- On-Hook Dialing
- Plus Dialing
- Privacy
- Quality Reporting Tool
- Redial
- Shared Lines
- Speed Dial
- Transfer
- Cisco WebDialer
- Sign In to the Cisco Unified Communications Self Care Portal
- Additional Options
- Troubleshooting
- Cisco One-Year Limited Hardware Warranty Terms
Set Up Call Back Notification
Procedure
Step 1
Press Call back while listening to the busy tone or ring sound.
A confirmation screen displays on the phone.
Step 2
Press Exit to exit the confirmation screen.
Your phone alerts you when the line is free.
Step 3
Press Call to place the call again.
Call Forward
Call Forward allows you to forward incoming calls from the conference station to another number.
There are two types of call forwarding features that the system administrator can set up for the conference
station:
•
Unconditional call forwarding (Call Forward All): Applies to all calls that you receive.
•
Conditional call forwarding (Call Forward No Answer, Call Forward Busy, Call Forward No Coverage):
Applies to certain calls that you receive.
If configured, you can set up Call Forward All from the conference station. Call Forward All can also be
accessed remotely from your Cisco Unified Communications Manager Self Care Portal. Conditional call
forwarding rules can only be accessed from Cisco Unified Communications Manager Self Care Portal.
When forwarding calls from your conference station:
•
Enter the call forward target number exactly as you would dial it from the conference station. For
example, enter an access code or the area code, if necessary.
•
Call forwarding is line specific. If a call reaches you on a line where call forwarding is not enabled, the
call rings as usual.
•
For more details about the following configurable call forward options, contact your system administrator:
◦
Allow calls placed from the call forward target number to the conference station to ring through,
rather than be forwarded.
◦
Prevent you from creating a call forward loop or exceeding the maximum number of links in a call
forwarding chain.
Cisco Unified IP Conference Phone 8831 and 8831NR User Guide for Cisco Unified Communications Manager
10.0
52
Calling Features
Set Up Call Back Notification