User Manual
Table Of Contents
- Cisco Unified IP Conference Phone 8831 and 8831NR User Guide for Cisco Unified Communications Manager 10.0
- Contents
- Preface
- Features of Your Cisco Unified IP Conference Phone
- Applications
- Contacts
- Messages
- Calling Features
- Softkey Feature Map
- Answer
- Call Back
- Call Forward
- Call Park
- Call Pickup
- cBarge
- Conference
- Divert
- Do Not Disturb
- Enhanced Room Coverage
- Cisco Extension Mobility
- Hold
- Hold Reversion
- Meet Me Conference
- Mobile Connect
- Monitoring and Recording
- Multiple Calls per Line
- Mute
- On-Hook Dialing
- Plus Dialing
- Privacy
- Quality Reporting Tool
- Redial
- Shared Lines
- Speed Dial
- Transfer
- Cisco WebDialer
- Sign In to the Cisco Unified Communications Self Care Portal
- Additional Options
- Troubleshooting
- Cisco One-Year Limited Hardware Warranty Terms
Procedure
Step 1
Align the ferrite bead with the head of the network cable and move the ferrite bead along the cable until there
is a gap of 1.0 mm +/- 0.3 mm between the bead and the connector.
Step 2
Place the cable into the ferrite bead channel and loop the cable around the ferrite bead so that the cable exits
the bottom of the bead.
Step 3
Hold the cable in the ferrite bead channel and close the ferrite bead. Snap the latch closed.
Wireless Microphone Setup and Use
When you remove the wireless microphone from the charger, the microphone automatically turns on and tries
to connect to the base. If the microphone is not paired, then pair it to the phone.
The Cisco Unified IP Conference Phone 8831NR does not supports wireless microphones.
When battery is removed from the microphone or the battery dies, the microphone unpairs from the phone.
Pair it to the phone again.
You can only charge the wireless microphone battery in the charger. You cannot use the wireless microphone
when it is in the charger.
LEDs on the wireless microphone base indicate the connection status of the microphone, and an icon will also
be displayed on the conference phone screen. The LEDs and the display screen also indicate the mute status
of the wireless microphone.
Cisco Unified IP Conference Phone 8831 and 8831NR User Guide for Cisco Unified Communications Manager
10.0
18
Features of Your Cisco Unified IP Conference Phone
Wireless Microphone Setup and Use