8821- Data Sheet
Table Of Contents
© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 10
Table 3. Specifications
Item
Specifications
Display
●
2.4-in. (6-cm) color display with 240 x 320 pixel resolution
Dimensions
(HxWxD)
●
5.2 x 2.2 x 0.7 in. (13.2 x 5.6 x 1.7 cm)
Weight
●
Device 4.4 oz (126 g), battery 1.3 oz (37 g), total = 5.7 oz (163 g)
Battery
●
Up to 9.5 hours of voice calling; up to 45 hours (continuous scan) or up to 145 hours (auto scan) standby
●
Rechargeable Lithium ion 4.35V, 2060mAh smart battery (minimal capacity 3.8V, 2000mAh)
Note: For voice calling, battery hours are calculated by placing a call and measuring the time it takes for the battery to
completely drain. Actual battery hours may vary depending on display and keypad activity, messaging from XSI
application, roaming events and scan mode, and use of a Bluetooth headset. Under normal usage when guidelines for
battery in the deployment guide are followed, battery hours should cover a typical work shift of eight hours.
Input power
●
Phone: 100 to 240 VAC, ~0.2A, and 50 to 60 Hz
●
AC adapters (by geographical region)
Operating
temperature
●
Device: 14° to 122°F (-10° to 50°C)
●
Battery: -4° to 140°F (-20° to 60°C)
Storage
temperature
●
Device: -22° to 140°F (-30° to 60°C)
●
Battery: -4° to 113°F (-20° to 45°C)
Relative humidity
●
10% to 95% (noncondensing)
Vibration
●
1.5 Grms maximum, 0.1 in. (2.5 mm) double amplitude at 0.887 octaves per minute from 5-500-5 Hz sweep, and 10-
minute dwell on three major peaks in each of the three major mutually perpendicular axes
Thermal shock
●
-22°F (-30°C) 1 hour; 158°F (70°C) 1 hour
Altitude
●
Certified for operation: 0 to 6500 ft (0 to 2 km)
Endurance
●
Ingress Protection Standard IP67
●
MIL-STD-810G Drop and Vibration procedures
Drop specs
●
Withstand multiple drops of 5 feet (1.5 m) onto concrete. 12 drops (6 faces, 4 edges, face, and bottom)
Headset
●
Wireless: Bluetooth SW 3.0 HW 4.0
●
Wired: 3.5 mm stereo headphone/microphone jack
Connector
●
Magnetic USB 2.0 On The Go (OTG) connector
Table 4. Certification and Compliance
Item
Specifications
Safety
●
UL 60950-1
●
CAN/CSA 60950-1
●
EN 60950-1
●
IEC 60950-1
●
AS/NZS 60950.1
●
IEC 60529 (IP 67)
Electromagnetic
Compatibility and
Electromagnetic
Interference
(EMC/EMI)
●
47 CFR Part 15 Class B
●
ICES-003 Class B
●
EN 55022 Class B
●
AS/NZS CISPR 22 Class B
●
CISPR 22 Class B
●
VCCI Class B
●
EN 61000-3-2
●
EN 61000-3-3
●
KN 22 Class B
●
EN 55024
●
EN 50082-1
●
EN 61000-6-1
●
EN61000-6-3










