User Manual

2
1 Overview
This guide is designed to help you quickly set up and use your Cisco IP Phone. To access complete
phone documentation on the Web, see the “Documentation on the Web” section on page 12.
2 Connecting Your Cisco IP Phone
Your system administrator or a technician will likely connect your new Cisco IP Phone to the corporate
IP telephony network. If that is not the case, connecting your phone is easy.
Note Be sure to read the “Safety Information for Your Cisco IP Phone” section on page 13 before
connecting or using your phone.
Refer to Figure 1 to locate connections on the back of your phone and to the following table for
descriptions of the phone connections.
1
DC Adaptor port (DC48V) for phones not
provided with inline power
5
Access port (10/100 PC) for connecting your
phone to your computer.
2
AC-to-DC power supply
6
Handset port
3
AC power cord
7
Headset port
4
Network port (10/100 SW) for connecting to
the network
8
Footstand button