User Manual

11
Tip You can customize the way your phone indicates the presence of an incoming call or a new
voice mail message for each of your lines. Customized ring sounds and other indicators can
help you quickly differentiate between multiple lines. For example, you can choose a chirping
sound to indicate an incoming call on Line 1 and a chime sound to indicate an incoming call
on Line 2.
Using Hold and Resume
The following table describes how to use Hold and Resume on your phone. (Some of these steps might
not apply to MGCP phones.)
Tip Because engaging the Hold feature generates music or a beeping tone, avoid putting a
conference call on hold.
Change the phone screen
contrast
Choose Settings > Contrast > Base Phone. Press the Up or Down
softkeys (or the Volume buttons) to set the desired display contrast.
Press the OK softkey to accept your changes.
If you Then...
Want to put a call on hold Make sure the call you want to put on Hold is highlighted (scroll to
the call if necessary). Press the Hold softkey.
Want to remove a call from
hold
Press the Resume softkey. If multiple calls are on hold, use the
Navigation button to select the desired call before you press Resume.
Have multiple calls on
multiple lines on hold
Press the line button for the line to which you want to switch, and
then use the Navigation button to select the desired call. Press
Resume.
If you want to... Then...