Product Data Sheet / Brochure

Data Sheet
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 7
Table 5. Cisco Unified IP Phone Expansion Module 7915 Button Support (SCCP)
Total Number of Buttons Supported Call-Control Release
Cisco Unified IP Phone 7962G
and 7965G Models
Cisco Unified IP Phone
7975G
Cisco Unified Communications Manager 4.2(3)SR3a, 4.3(2), 5.1(3)b, and
6.1(1), 7.0, and 7.1
42 42
Cisco Unified Communications Manager 7.1(3) / Cisco IP Phone Firmware
8.5(3) and later
54 56
Cisco Unified Communications Manager Express 4.3/7.0 and later 54 56
Table 6. Cisco Unified IP Phone Expansion Module 7915 Button Support (SIP)
Total Number of Buttons Supported Call-Control Release
Cisco Unified IP Phone 7962G
and 7965G Models
Cisco Unified IP Phone
7975G
Cisco Unified Communications Manager 7.0 and 7.1 36 36
Cisco Unified Communications Manager 7.1(3) / Cisco IP Phone Firmware
8.5(3) and later
54 56
Cisco Unified Communications Manager Express 4.3/7.0 and later 54 56
Hardware Requirements
●
Cisco Unified IP Phone 7962G, 7965G, and 7975G models
●
Cisco Unified IP Phone Expansion Module 7915 (CP-7915=)
The maximum is two modules (connecting cable supplied with each Cisco Unified IP Phone Expansion
Module 7915)
●
Footstand is required; single (CP-SINGLFOOTSTAND=) or double (CP-DOUBLFOOTSTAND=) (required
items for double Cisco Unified Expansion Module installation shown in Figure 4).
Replacement of the standard Cisco Unified IP phone footstand is required. The standard footstand is
replaced with a two-piece footstand specifically designed to support the Cisco Unified IP Phone Expansion
Module 7915. Two footstands are available: a single footstand when one Cisco Unified IP Phone
Expansion Module 7915 is used and a double footstand when two Cisco Unified IP Phone Expansion
Module 7915 modules are used.
The only tool required for installation of the Cisco Unified IP Phone Expansion Module 7915 is a flat-blade
screwdriver or other appropriate tool to unlatch the pins securing the footstand to the Cisco Unified IP
Phone 7962G, 7965G, and 7975G models.
●
Power cube (CP-PWR-CUBE-3=) and cord (CP-PWR-CORD-xx=) to supply local power
Table 6 gives power options for the Cisco Unified IP Phone Expansion Module 7915.