Datasheet

© 2005 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 2 of 5
Figure 2. Cisco Unified IP Phone 7910G+SW
Icon buttons
The Cisco Unified IP Phone 7910G+SW plugs into a standard RJ-45 Ethernet connection and has a two-port switch with 10/100BASE-T interface.
This provides single RJ-45 connection at the desktop for the phone and an additional LAN device such as a PC.
The footstand of the Cisco Unified IP Phone 7910G+SW is adjustable from flat to 60 degrees to provide optimum viewing of the display and
comfortable use of all buttons and keys.
TECHNICAL SPECIFICATIONS
Hearing-aid-compatible (HAC) handset with ADA-compliant volume
G.711 and G.729a audio compression
Dynamic Host Configuration Protocol (DHCP) is supported
Comfort noise generation and voice activity detection (VAD) programming on a system basis
7910 models are compatible with CallManager version 3.0(5) or higher
CallManager Software license is required.
PHYSICAL SPECIFICATIONS
Dimensions: 8 1/4 x 10.1/2 x 6 in. (20.32 x 26.67 x 15.24 cm) (H x W x D)
Weight: 2.2 lb (1.0 kg)
The 7910G+SW has two standard 10/100 BASE-T RJ-45 jacks.
48 VDC required; can be provided down the LAN using Cisco Discovery Protocol (CDP), or can be supplied locally at the desktop using an optional
AC to DC power supply, CP-PWR-CUBE-3=. This power cube also requires ordering one of the AC country cords below.
AC Country Power Cords
CP-PWR-CORD-AP= (Asia Pacific)
CP-PWR-CORD-AR= (Argentina)
CP-PWR-CORD-AU= (Australia)
CP-PWR-CORD-CE= (Central Europe)
CP-PWR-CORD-JP= (Japan)