User Manual
Table Of Contents
- Cisco Unified IP Phone 7906G and 7911G User Guide for Cisco Unified Communications Manager 8.5(1) (SCCP and SIP)
- Phone Guide
- Contents
- Getting Started
- Connecting Your Phone
- An Overview of Your Phone
- Basic Call Handling
- Placing a Call-Basic Options
- Placing a Call-Additional Options
- Answering a Call
- Ending a Call
- Using Hold and Resume
- Switching Between Multiple Calls
- Switching an In-Progress Call to Another Phone
- Viewing Multiple Calls
- Transferring Calls
- Sending a Call to a Voice Message System
- Forwarding Calls to Another Number
- Using Do Not Disturb
- Making Conference Calls
- Advanced Call Handling
- Speed Dialing
- Picking Up a Redirected Call on Your Phone
- Storing and Retrieving Parked Calls
- Logging Out of Hunt Groups
- Using a Shared Line
- Making and Receiving Secure Calls
- Tracing Suspicious Calls
- Prioritizing Critical Calls
- Using Cisco Extension Mobility
- Managing Business Calls Using a Single Phone Number
- Using a Handset, Headset, and Speaker
- Changing Phone Settings
- Using Call Logs and Directories
- Accessing Voice Messages
- Using the Cisco Unified CM User Options Web Pages
- Accessing Your User Options Web Pages
- Configuring Features and Services on the Web
- Understanding Additional Configuration Options
- Troubleshooting Your Phone
- Cisco One-Year Limited Hardware Warranty Terms
- Index
52 OL-22336-01
Dial from a call log
(while not on another
call)
1. Press and choose Directories > Missed Calls, Placed Calls, or
Received Calls.
2. Highlight a call record from the log.
Note If the Details softkey appears, the call is the primary entry of a multiparty
call. See the Tips section below.
3. If you need to edit the displayed number, press EditDial followed by <<
or >>. To delete the number, press EditDial followed by Delete. (You may
need to press the more softkey to display Delete.)
4. Go off-hook to place the call.
Dial from a call log
(while connected to
another call)
1. Press , and choose Directories > Missed Calls, Placed Calls, or
Received Calls.
2. Highlight a call record from the log.
Note If the Details softkey displays, the call is the primary entry of a multiparty
call. See the
Tips section below.
3. If you need to edit the displayed number, press EditDial followed by <<
or >>. To delete the number, press EditDial followed by Delete. (You may
need to press the more softkey to display Delete.)
4. Press Dial.
5. Choose one of the following to handle the original call:
–
Hold—Puts the first call on hold.
–
Transfer—Transfers the first party to the second and drops you from
the call. (Press Transfer again after dialing to complete the action.)
–
Confrn—Creates a conference call with all parties, including you.
(Press Confrn again after dialing to complete the action.)
–
EndCall—Disconnects the first call and dials the second.
If you want to... Then...