Specifications

4-31
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 4 Configuring Devices
Configuring the Service Engine
If you remove all device group settings, all device settings displayed with Aggregate Settings enabled
are removed as well.
Note The last configuration submitted for the device, whether it is the device group configuration or
the individual device configuration, is the configuration the device uses.
Step 3 Click Create New in the task bar. The Scheduled Bandwidth page is displayed.
To edit a bandwidth schedule, click the Edit icon next to the scheduled bandwidth you want to edit.
Step 4 Enter the settings as appropriate. See Table 4-13 for a description of the fields.
Step 5 Click Submit to save the settings.
Bandwidth Graph
To view a graphical representation of the bandwidth settings, click the Display Graph icon in the task
bar. The Application Bandwidth graph is displayed in a new window.
Table 4-13 Application Control Bandwidth Schedule Fields
Field Description
Bandwidth Type Windows Media Incoming—Incoming Windows Media streaming content
requests from end users.
Windows Media Outgoing—Outgoing Windows Media content from SEs.
Movie Streamer Incoming—Incoming Movie Streamer content requests from
end users.
Movie Streamer Outgoing—Outgoing Movie Streamer content in response to
RTSP requests from end users.
Note Movie Streamer Ingoing and Movie Streamer Outgoing fields are
Release 2.2 features. In Releases 2.0 and 2.1, the Movie Streamer option
applies to outgoing Movie Streamer content.
HTTP—Sending content in response to HTTP requests from end users. This
field applies to Releases 2.0 and 2.1 only.
Bandwidth Rate Maximum amount of bandwidth you want to allow (in kilobits per second).
Start Time Time of day for the bandwidth rate setting to start, using a 24-hour clock in local
time (hh:mm).
End Time Time of day for the bandwidth rate setting to end (hh:mm).
Use Specific Days Days of the week on which configured bandwidth settings apply.
• Full Week—Bandwidth settings are applied to the entire week.
• Sun, Mon, Tue, Wed, Thu, Fri, and Sat—Specific days of the week on which
configured bandwidth settings apply.
Specific Day Range Range of days of the week on which configured bandwidth settings apply.
• Start day—Day of the week to start for allowable bandwidth.
• End day—Day of the week to end for allowable bandwidth.