Specifications

4-23
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 4 Configuring Devices
Configuring the Service Engine
To configure a PCMM QoS Policy, do the following:
Step 1 Choose Devices > Devices > Service Control > PCMM QoS Policy. The PCMM QoS Policy page is
displayed (Figure 4-15).
Figure 4-15 PCMM QoS Policy Page
Step 2 Check the Enable check box to enable policy server settings for the device.
Step 3 Check the Set Config File or URL check box to specify the configuration file for the HTTP callout to
the policy server.
The configuration file is an XML file that contains information on the callout URLs, attributes,
application type, protocol, and so on.
Step 4 In the Config File or URL field, enter the filename or URL from which the SE can download the
configuration file and click Fetch Config File Now. This field supports only URLs that use HTTP,
HTTPS, or FTP.
Step 5 Click Submit to save the settings.
Configuring URL Signing
URL signature keys are word values that ensure URL-level security. The URL signature key is a shared
secret between the device that assigns the key and the device that decrypts the key. Based on your
network settings, either the SE itself or some other external device can assign the signature key to the
URL, but the SE decrypts the URL signature key.
The CDS uses a combination of key owners, key ID numbers, and a word value to generate URL
signature keys. You can have a maximum of 32 key owners. Each key owner can have up to 16 key ID
numbers.
To create request-specific URL signature keys, you can choose to append the IP address of the client that
has made the request to the URL signature key.