Specifications

4-14
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 4 Configuring Devices
Configuring the Service Engine
Figure 4-10 Replication Scheduled Bandwidth Page
Step 4
Enter the settings as appropriate. See Table 4-5 for a description of the fields.
Step 5 Click Submit to save the settings.
Service Control
The Service Control pages provide settings for client request filtering, URL signing, and third-party QoS
and conditional access policies. Additionally, transaction logs that monitor traffic are configured under
the Service Control. Configuring service control consists of the following procedures:
• Configuring Service Rules
• Configuring ICAP
Table 4-5 Replication Scheduled Bandwidth Fields
Field Description
Bandwidth Type Distribution-in—For incoming content distribution traffic from SEs.
Distribution-out—For outgoing content distribution traffic to SEs.
Acquisition-in—For incoming content acquisition traffic from origin servers.
Bandwidth Rate Maximum amount of bandwidth that you want to allow (in kbps).
Start Time Time of day for the bandwidth setting to begin, using a 24-hour clock in local time
(hh:mm).
End Time Time of day for the bandwidth setting to end (hh:mm).
Day Selection Days on which bandwidth settings apply.
• Full Week—Specifies that the allowable bandwidth settings are applied for an
entire week.
• Sun, Mon, Tue, Wed, Thu, Fri, and Sat—Specifies individual days of the week
on which the allowable bandwidth settings take effect.