Specifications

4-12
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 4 Configuring Devices
Configuring the Service Engine
Bandwidth Graph
To view a graphical representation of the bandwidth settings, click the Display Graph icon in the task
bar. The Acquisition and Distribution Bandwidth graph is displayed in a new window.
The vertical axis of the graph represents the amount of bandwidth in Kbps (kilobits per second) and the
horizontal axis represents the days of the week. The scale shown on the vertical axis is determined
dynamically based on the bandwidth rate for a particular type of bandwidth and is incremented
appropriately. The scale shown on the horizontal axis for each day is incremented for each hour. Each
type of bandwidth is represented by a unique color. A legend at the bottom of the graph maps the colors
to the corresponding bandwidths.
You can change the graph view by choosing the different options, as described in Table 4-4.
Scheduled Bandwidth
Scheduled Bandwidth settings take precedence over Default Bandwidth settings.
To configure a bandwidth schedule, do the following:
Step 1 Choose Devices > Devices > Replication > Scheduled Bandwidth. The Replication Scheduled
Bandwidth Table page is displayed (Figure 4-9).
Table 4-4 Acquisition and Distribution Bandwidth Graph—Viewing Options
Option Description
Distribution In Bandwidth settings for incoming content distribution traffic.
Distribution Out Bandwidth settings for outgoing content distribution traffic.
Acquisition In Bandwidth settings for incoming content acquisition traffic.
All Servers A consolidated view of all configured bandwidth types. This is the default.
Show Detailed
Bandwidth/Show
Effective Bandwidth
Toggles between the two options:
Show Detailed Bandwidth—Displays detailed bandwidth settings for the
SE and its associated device groups. The bandwidth settings of the
device and device groups are shown in different colors for easy
identification.
Show Effective Bandwidth—Displays the composite (aggregate)
bandwidth settings for the SE and its associated device groups.
Show Aggregate
View/Show
Non-Aggregate View
Toggles between the two options:
Show Aggregate View—Displays the bandwidth settings configured for
the corresponding device groups.
Show non-Aggregate View—Displays the bandwidth settings configured
for the SE.
Sun, Mon, Tues,
Wed, Thurs, Fri, Sat
Displays the bandwidth settings for the corresponding day of the week.
Full Week Displays the bandwidth settings for the entire week This is the default view
and is combined with the All Servers view.