Specifications

4-11
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 4 Configuring Devices
Configuring the Service Engine
• Scheduled Bandwidth
Default Bandwidth
The default bandwidth settings can be configured for acquisition (ingest) and distribution (replication)
of content. The default settings are used unless a scheduled bandwidth is configured for a specified time
period.
To set the default bandwidth for replication, do the following:
Step 1 Choose Devices > Devices > Replication > Default Bandwidth. The Replication Default Bandwidth
page is displayed (Figure 4-8).
Figure 4-8 Replication Default Bandwidth Page
Step 2
Enter the settings as appropriate. See Table 4-3 for a description of the fields.
Step 3 Click Submit to save the settings.
Table 4-3 Replication Default Bandwidth Fields
Field Description
Acquisition-in
Bandwidth
Bandwidth used for ingesting content when this SE is acting as the Content
Acquirer.
The default is 500000 kbps (kilobits per second) .
Distribution-in
Bandwidth
Bandwidth used for incoming content that is sent by a forwarding SE as part of the
distribution process.
The default is 250000 kbps.
Distribution-out
Bandwidth
Bandwidth used for outgoing content that is sent to a downstream SE as part of the
distribution process.
The default is 500000 kbps.