Specifications

4-3
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 4 Configuring Devices
Configuring Device Groups
Step 4 Click Submit to save the settings.
To delete a location, from the Locations Table page, click the Edit icon next to the location you want to
delete, and click the Trash icon in the task bar.
To view the location tree, click the Location Trees icon in the task bar. The location tree represents the
network topology you configured when you assigned a parent to each location.
Configuring Device Groups
The Internet Streaming CDSM allows you to configure SEs into device groups so that the entire group
of SEs is configured at one time. Device groups and SEs share the same configuration features and
options.
This section covers creating, editing, and deleting device groups. For information on assigning devices
to a device group, see the “Assigning Devices to Device Groups” section on page 4-9. All other
configuration pages for a device group are covered in the “Configuring the Service Engine” section on
page 4-6.
Note The last configuration submitted for the device, whether it is the device group configuration or the
individual device configuration, is the configuration the device uses.
To create or edit a device group, do the following:
Step 1 Choose Devices > Device Groups. The Device Groups Table page is displayed (Figure 4-3).
Table 4-1 Location Fields
Field Description
Name Name of the location.
Parent Location Choose a location from the drop-down list. A location with no parent, None, is
level 1. The location level is displayed after you choose a parent location.
Comments Enter any information about the location.