Specifications

CHAPTER

4-1

Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide

OL-13493-04

Configuring Devices

This chapter discusses configuring locations and device groups for devices, and detailed instructions on

configuring the different types of devices–CDSMs, SEs, and, SRs. This chapter presents the following

major topics:

• Configuring Locations, page 4-1

• Configuring Device Groups, page 4-3

• Configuring the Service Engine, page 4-6

• Configuring the Service Router, page 4-87

• Configuring the CDSM, page 4-91

Configuring Locations

Locations are set up in the Internet Streaming CDSM to organize and group SEs into virtual networks

for distribution of content through delivery services. For more information about locations, see the

“Cisco CDS Topology” section on page 2-1.

Locations need to be configured before you can activate SEs and SRs and bring them online in the CDS

network.

To create a new location or edit an existing one, do the following:

Step 1 Choose Devices > Locations. The Locations Table page is displayed (Figure 4-1).