Specifications

3-5
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 3 Getting Started
Activating and Synchronizing the Devices
Tip For a quick way to get to other SEs, click the Display All Devices icon located to the left of the Expand
All button. This icon toggles between the Display All Devices and Menu icons.
For more detailed information about configuring locations, activating devices, and configuring NTP
servers, see the following sections:
• Configuring Locations, page 4-1
• Activating a Service Engine, page 4-6
• Configuring NTP, page 4-58
Activating All Inactive Service Engines
To activate all inactive SEs, do the following:
Step 1 From the CDSM home page, choose Device > Devices and click the Activate All Inactive SEs icon. See
Figure 3-4.
Figure 3-4 Devices Table Page—Activate All Inactive Service Engines
The Location Choice page is displayed (Figure 3-5).
Figure 3-5 Location Choice Page
Step 2
In the Location Choice page, click either Select an Existing Location for All Inactive SEs or Create
a New Location for Each Inactive SE.