Specifications

G-11
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Appendix G Testing the Internet Streamer CDS
Testing the Movie Streamer Engine
NE-DEMO-SE1# show statistics wmt streamstat
Detailed Stream Statistics
=====================================
Incoming Streams:
=================
Stream-Id Type Source State Bytes-Recd Duration Bandwidth Server-IP Url-Requested
18872 LIVE RMT_HTTP Play 84150 241 288 171.70.22.171
http://171.70.222.171:0000
Outgoing Streams:
=================
Client-IP Type Transport Source State Pkts-set Bytes-sent Duration BW Filename Stream-id
3.1.4.14 LIVE RTSPT RMT_HTTP Play 5393 7787492 233 288 8080 18889
NE-DEMO-SE2# show statistics wmt streamstat
Detailed Stream Statistics
=====================================
Incoming Streams:
=================
Stream-Id Type Source State Bytes-Recd Duration Bandwidth Server-IP Url-Requested
28772 LIVE RMT_RTSP Play 8205265 246 289 3.1.4.10
rtsp;//3.1.4.10/wmt_proxy/rtsp&ofqdn.cds.com/wmtlive/__CDS/http&171.70.111.171&8080
Outgoing Streams:
=================
Client-IP Type Transport Source State Pkts-set Bytes-sent Duration BW Filename Stream-id
171.70.222.171 LIVE RTSPU RMT_RTSP Play 5582 8060408 241 288 wmtlive 28755
Testing the Movie Streamer Engine
Note In Release 2.0, Movie Streamer was in a demonstration state for live streaming, prefetched, cached and
dynamically cached content.
In Release 2.1, live streaming is in full production. Prefetched, cached, and dynamically cached content
remain in a demonstration state.
For details of live streaming performance for Movie Streamer, please refer to the Release 2.1
performance bulletin.
This section includes the following procedures:
• Preparing Movie Streamer Content for Ingest
• Testing Preingested Movie Streamer Content
• Testing Dynamically Ingested Movie Streamer Content
• Testing Movie Streamer Live Content Playback