Specifications

G-10
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Appendix G Testing the Internet Streamer CDS
Testing the Windows Media Streaming Engine
Outgoing Streams:
=================
Client-IP Type Transport Source State Pkts-set Bytes-sent Duration BW Filename Stream-id
171.70.222.171 VOD RTSPT RMT_RTSP Play 279 2232000 13 7201 test_cache/test.wmv 12043
Testing Windows Media Live Content Playback
Note Each live program uses a live delivery service to deliver the live program. See the “Configuring
Programs” section on page 5-26 for more information.
Step 1 On the client PC, start the Windows Media Player.
Step 2 Choose File > Open URL.
Step 3 Enter the URL for the live program in the Open URL dialog box (Figure G-8) and click OK. In the
example, this is “rtsp://rfqdn.cds.com/wmtlive.”
Figure G-8 Open URL Dialog Box
The video begins to play.
Step 4 To view the statistics on the video file, choose View > Statistics and then click the Advanced tab
(Figure G-9).
Figure G-9 Windows Media Player Statistics
Step 5 To view the incoming and outgoing streams, enter the show statistics wmt streamstat command on the
SEs streaming the content. In this case, the request is served from NE-DEMO-SE2.