Specifications

G-8
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Appendix G Testing the Internet Streamer CDS
Testing the Windows Media Streaming Engine
Figure G-5 Windows Media Player Statistics
Step 5 To view the request flow, enter the show statistics wmt streamstat command on the SEs. In this case,
the request is served from NE-DEMO-SE2.
NE-DEMO-SE1# show statistics wmt streamstat
Detailed Stream Statistics
=====================================
Incoming Streams:
=================
Stream-Id Type Source State Bytes-Recd Duration Bandwidth Server-IP Url-Requested
Outgoing Streams:
=================
Client-IP Type Transport Source State Pkts-set Bytes-sent Duration BW Filename Stream-id
NE-DEMO-SE2# show statistics wmt streamstat
Detailed Stream Statistics
=====================================
Incoming Streams:
=================
Stream-Id Type Source State Bytes-Recd Duration Bandwidth Server-IP Url-Requested
Outgoing Streams:
=================
Client-IP Type Transport Source State Pkts-set Bytes-sent Duration BW Filename Stream-id
171.70.222.171 VOD NONE LOCAL Setup 0 0 0 0 test_prepos/test.wmv 8895
Testing Dynamically Ingested Windows Media Content
Step 1 On the client PC, start the Windows Media Player program.
Step 2 Choose File > Open URL.
Step 3 Enter the URL of content that has not been preingested in the Open URL dialog box (Figure G-6) and
click OK. In the example, this is “rtsp://rfqdn.cds.com/test_cache/test.wmv.”