Specifications

E-4
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Appendix E CLI Commands
Configuring Port Channel
To verify the setup before application traffic is sent, use the following:
SE# clear statistics all
SE# show interface portChannel 1
Interface PortChannel 1 (2 physical interface(s)):
GigabitEthernet 3/0 (active)
GigabitEthernet 4/0 (active)
GigabitEthernet 5/0 (active)
GigabitEthernet 6/0 (active)
---------------------
Type:Ethernet
Ethernet address:00:04:23:D8:86:02
Internet address:3.1.7.73
Broadcast address:3.1.7.255
Netmask:255.255.255.0
Maximum Transfer Unit Size:1500
Metric:1
Packets Received: 28
Input Errors: 0
Input Packets Dropped: 0
Input Packets Overruns: 0
Input Packets Frames: 0
Packet Sent: 40
Output Errors: 0
Output Packets Dropped: 0
Output Packets Overruns: 0
Output Packets Carrier: 0
Output Queue Length:0
Collisions: 0
Flags:UP BROADCAST RUNNING MASTER MULTICAST
SE# show interface portChannel 2
Interface PortChannel 2 (4 physical interface(s)):
GigabitEthernet 1/0 (active)
GigabitEthernet 2/0 (active)
---------------------
Type:Ethernet
Ethernet address:00:30:48:33:01:26
Internet address:3.1.8.200
Broadcast address:3.1.8.255
Netmask:255.255.255.0
Maximum Transfer Unit Size:1500
Metric:1
Packets Received: 6
Input Errors: 0
Input Packets Dropped: 0
Input Packets Overruns: 0
Input Packets Frames: 0
Packet Sent: 0
Output Errors: 0
Output Packets Dropped: 0
Output Packets Overruns: 0
Output Packets Carrier: 0
Output Queue Length:0
Collisions: 0
Flags:UP BROADCAST RUNNING MASTER MULTICAST
To verify the setup after application traffic is sent, use the following:
SE# show interface portChannel 1
Interface PortChannel 1 (4 physical interface(s)):
GigabitEthernet 3/0 (active)
GigabitEthernet 4/0 (active)
GigabitEthernet 5/0 (active)