Specifications

A-3
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Appendix A Troubleshooting
Troubleshooting Content Acquisition
se1# show distribution remote traceroute unicast-sender delivery-service-id 133 probe
?
max-hop Max-hop to traceroute to
trace-till-good traceroute till probe is good or the object is found
trace-till-root traceroute till the root se
se1# show distribution remote traceroute unicast-sender delivery-service-id 133 probe
trace-till-root
Polling .... se3 [10.255.0.43] Fwdr_Id:1100
Polling .... se3 [128.107.193.183] Fwdr_Id:1100
(Reached RootSE)
Troubleshooting Content Acquisition
To monitor acquisition progress and to troubleshoot, use the following commands from the Content
Acquirer CLI:
• Use the show acquirer delivery-services EXEC command to obtain delivery service information,
such as the delivery service ID and delivery service name, that you need to enter in other show
acquirer commands, such as the show acquirer progress command. In the following example, the
delivery service ID is 793 and the delivery service name is group01-cifs.
SE# show acquirer delivery-services
Querying Database.......
Acquirer information for all delivery services:
--------------------------------------
Delivery-service-id : 793
Delivery-service-Name : group01-cifs
WebSite-Name : group01-cifs
Root-CE-Type : Configured
State : Enabled
Disk Quota : 200 MB
Origin FQDN : cdn.allcisco.com
Delivery-service Priority : 500
Manifestfile-TTL : 5
Manifestfile-URL : ftp://10.1.1.1/cifs.xml
• Use the show acquirer EXEC command to make sure that the acquirer process on the Content
Acquirer is working correctly, and that the device is using the expected amount of bandwidth for
acquisition. The following example shows that the acquirer is running properly and that the device
is configured with unlimited bandwidth for acquisition of content.
SE# show acquirer
Acquirer is running OK
Current Acquisition Bandwidth:Not Limited
• Use the show acquirer progress EXEC command to check how far the acquisition of content has
progressed. A specific delivery service ID or delivery service name can be specified to obtain the
progress for a specific delivery service. In the following example, the acquirer has already acquired
2237 items.
SE# show acquirer progress delivery-service-id 793
Querying Database.......
Acquirer progress information for delivery service ID:793
Delivery-service-Name:group01-cifs
-----------------------------------------------------------------
Acquired Single Items : 0 / 0
Acquired Crawl Items : 2237 / 2500 -- start-url=www.mtv.com//