Specifications

8-24
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 8 Maintaining the Internet Streamer CDS
Backup and Recovery Procedures
Check whether first-disk is bad, or
use 'disk recover-system-volumes' to recover first-disk.
********************************************
Step 5 Log in as admin.
Cisco Service Engine Console
Username: admin
Password:
System Initialization Finished.
SE-507 con now available
Press RETURN to get started!
Step 6 After logging in to a console or SSH session, enter the copy ftp install or copy http install EXEC
command to download and install a new system image.
ServiceEngine# copy ftp install ftp-server remotefiledir remotefilename
For example:
SE# copy ftp install vista /CDS/upgrades CDS-2.0.0.2-K9.bin
Enter username for remote ftp server: biff
Enter password for remote ftp server:
Initiating FTP download...
printing one # per 1MB downloaded
Reclaiming unused safe state sectors...
############################################################################
###########
############################################################################
###########
Installing phase3 bootloader...
Installing system image to flash: done
The new software will run after you reload.
#
ServiceEngine# show flash
CDS software version (disk-based code): CDS-2.0.1-b130
System image on flash:
Version: 2.0.1.2
System flash directory:
System image: 98 sectors
Bootloader, rescue image, and other reserved areas: 26 sectors
128 sectors total, 4 sectors free.
Step 7 Reboot the software with the new disk and new system image by entering the reload EXEC command.
SE# reload
Step 8 Register the device with the CDSM by using the cms enable command in global configuration mode.
SE# configure
SE(config)# cms enable