Specifications

8-17
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 8 Maintaining the Internet Streamer CDS
Backup and Recovery Procedures
The .sysimg component is provided for recovery purposes, and allows for repair of flash memory
only, without modifying the disk contents.
Getting the Cisco CDS Software Recovery File from Cisco.com
To get a software file from Cisco.com, do the following:
Step 1 Launch your web browser and enter the following URL:
http://www.cisco.com/kobayashi/sw-center/sw-video.shtml
The Log In page is displayed.
Step 2 Log in to Cisco.com using your designated username and password. The Video and Content Delivery
page is displayed, listing the available software products.
Step 3 Click Cisco Content Delivery Systems (CDS). The Downloads page is displayed.
Step 4 Click the Cisco Content Delivery Applications folder to expand it, and click the Cisco Internet
Streamer Application. The page refreshes and the software releases are displayed.
Step 5 Click the link for the software recovery file you want to download.
• If this is the first time you have downloaded a file from Cisco.com, the Cisco Systems Inc.,
Encryption Software Usage Handling and Distribution Policy is displayed. Read the policy, fill in
the unfilled fields, and click Accept.
• If you previously filled out the Encryption Software Usage and Handling and Distribution form, the
form does not display again.
The Download page is displayed with the information about the software image file and a Download
link.
Step 6 Click Download. The Cisco End User Software License Agreement is displayed.
Step 7 Read the agreement and click Agree. The File Download dialog box is displayed.
Step 8 Click Save. The Save As dialog box is displayed.
Step 9 Navigate to the location where you want to save the file and click Save. The file downloads.
Step 10 Burn the software recovery image file onto a CD-ROM.
Installing the Software Using the Recovery CD-ROM
Note For the CDE200, do not use the internal CD-ROM drive for recovery or remanufacture procedures. Use
the external USB CD-ROM drive for all procedures that require a CD-ROM.
For the CDE100, use the internal CD-ROM drive for recovery or remanufacture procedures.
To install the system software by using the recovery CD-ROM, perform the following steps:
Step 1 Plug a USB CD-ROM drive into a USB port on the device.
Step 2 Insert the recovery software CD-ROM into the USB CD-ROM drive, and boot the device.