Specifications

8-9
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 8 Maintaining the Internet Streamer CDS
Rebooting Devices
Software Upgrades by Device
Use this upgrade procedure for Service Routers and CDSMs. You can also use this upgrade procedure
to upgrade Service Engines one at a time.
To upgrade your software on a single device, do the following:
Step 1 Choose Devices > Devices. The Devices Table page is displayed.
Step 2 Click the Edit icon of the device that you want to upgrade. The Device home page is displayed.
Step 3 Verify that the device is not already running the version that you plan to upgrade to, and that the current
version has an upgrade path to the version that you plan to upgrade to.
Step 4 Click Update Software. The Software Update page is displayed.
Step 5 Choose the software file URL from the Software Files list by clicking the radio button next to the
filename.
Step 6 Click Submit, and then click OK to confirm your decision.
The Devices Table page is displayed again. You can monitor the progress of your upgrade from this page.
Software upgrade status messages are displayed in the Software Version column. These intermediate
messages are also written to the system log on the Service Engines. See Table 8-1 for a description of
upgrade status messages.
Rebooting Devices
You can reboot a device or device group. The CDSM performs a controlled shutdown of all devices and
then restarts the operating system on each device.
To reboot an individual device, do the following:
Step 1 Choose Devices > Devices.
Step 2 Click the Edit icon next to the device name that you want to reboot. The Device home page is displayed
Step 3 In the task bar, click the Reload icon. You are prompted to confirm your decision.
Step 4 To begin rebooting the device, click OK.
To reboot an entire device group, follow these steps:
Step 1 Choose Devices > Device Groups.
Step 2 Click the Edit icon next to the name of the device group that you want to reboot. The Device Group page
is displayed.
Step 3 In the task bar, click the Reboot All Devices in Device Group icon. You are prompted to confirm your
decision.
Step 4 To begin rebooting each SE in the device group, click OK.