Specifications

8-4
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 8 Maintaining the Internet Streamer CDS
Software Upgrade
Figure 8-1 Software Image Page
Step 3
In the Software Image URL field, enter the URL for the .bin software file that you downloaded from
Cisco.com.
a. Choose a protocol (http or ftp) from the drop-down list.
b. Enter the URL of the software file; for example, a valid URL might look like this:
http://internal.mysite.com/cds/CDS-2.x.x-K9.bin
In this URL, CDS-2.x.x-K9 is the name of the software upgrade file. (The filename might include
the version number.)
Note If you are using a pre-positioned software file and you are entering the URL manually (rather
than using the Select File from Delivery Service option), the server name or IP address of
the URL in the Software Image URL field must match either the Origin Server field or the
Service Routing Domain Name field in the Content Origin page of the delivery service. This
is not a requirement if you are downloading the software file directly from the origin server.
(See the “Pre-positioning a Software File” section on page 8-2 for details.)
Alternatively, click Select File from Delivery Service. A separate window displays that allows you to
choose a delivery service, set criteria, search the delivery service, and select the software file that you
want to use for the software upgrade. (You must first pre-position the software file in the delivery service.
See the “Pre-positioning a Software File” section on page 8-2.)