Specifications

7-9
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 7 Monitoring the Internet Streamer CDS
Device Monitoring
Using show and clear Commands
The show and clear commands offer more detailed monitoring of the device. Table 7-7 lists only the
show command parameters where arguments are required or are optional. Table 7-8 lists only the clear
command parameters where arguments are required. A full list of the show and clear commands is
available from the drop-down list on the respective page.
Using the CDSM show or clear Command Tool
To use the CDSM show or clear command tool, follow these steps:
Step 1 Choose Devices > Devices > Monitoring > Show/Clear Commands and then click either Show
Commands or Clear Commands.
Step 2 From the drop-down list, choose a command.
Step 3 Enter arguments for the command, if any.
Step 4 Click Submit to display the command output. The results of the command are displayed in a new
window.
Table 7-7 show Command Arguments
show Command Arguments Device
access-list 300 SE
acquirer [delivery-service [delivery-service-id delivery-service-num |
delivery-service-name delivery-service-name] | progress
[delivery-service-id delivery-service-num |
delivery-service-name delivery-service-name] | proxy
authentication]
SE
alarms [critical | detail | history | major | minor | status] SE, SR,
CDSM
authentication http-request | user SE, SR,
CDSM
bandwidth [flash-media-streaming | movie-streamer | wmt]SE
bitrate [wmt]SE
cache [content 1-1000]SE
cdn-statistics {flash-media-streaming {device-group-name
device-group-name | device-groups | service-engines}
movie-streamer {service-engines | device-group-name
groupname | device-groups} | http {service-engines |
device-group-name groupname | device-groups} | wmt
{service-engines | device-group-name groupname |
device-groups}}
CDSM
cdnfs usage |
volumes SE
clock [detail | standard-timezones {all | details timezone | regions |
zones region-name}]
SE, SR,
CDSM