Specifications

7-7
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 7 Monitoring the Internet Streamer CDS
Device Monitoring
The task bar options provide other table manipulations, including filtering, exporting the table,
refreshing the table, viewing all items, activating all inactive SEs, and printing. The filter option allows
you to filter on device name, device type, or status. To display all items after a filter has been set, click
the View All icon.
Device Home Page
The Device home page (Figure 7-6) provides alarm status and information on the device. Only basic
information is displayed for the SR and CDSM.
Clicking the Delivery Services and Device Groups links on the home page for an SE takes you to a
corresponding table listing all the delivery services or device groups in the CDS, and which ones the SE
is assigned to. Through this page, you can assign the device to additional delivery services or device
groups by clicking the icon next to the applicable delivery services or device groups and submitting your
selection.
You can update the device software, and telnet to the device from the Device home page. For more
information about updating the software, see the “Software Upgrade” section on page 8-1.
Ta b l e 7- 5 D e v i c e Ta b l e C o l u m n s
Column Heading Description
Device Name Host name of the device.
Type Device type: SE, SR, CDSM (Primary), CDSM (Secondary)
IP Address Primary IP address of the device.
Status Status is one of the following:
• Online—Device has been activated through the CDSM and
is able to send and receive data and control traffic.
• Offline—Device has failed to communicate with the
CDSM.
• Pending—Device status cannot be determined. The device
could be in the process of being activated by the CDSM
• Offloading—Device is in the Server Offload state. See the
Server Offload field in Table 4-2 on page 4-8 for more
information. To monitor the current streams on an SE
during the Server Offload state, view the statistics for each
protocol engine (for example, Movie Streamer),
specifically the fields noted in Table 7-22 on page 7-27.
Once all protocol engines have finished streaming, you can
perform maintenance or upgrade the software on the
device. For information about upgrading the software, see
the “Upgrading the Software” section on page 8-6.
Location Location the device is assigned to.
Software Version Device software version.