Specifications

5-39
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 5 Configuring Services
Viewing Programs
Step 2 In the Start Address field, specify the first multicast IP address in the pool.
The range is 224.0.0.0 to 239.255.255.255.
Step 3 In the End Address field, specify the last multicast IP address in the pool.
The range is 224.0.0.0 to 239.255.255.255.
Step 4 In the TTL field, specify the time-to-live (number of hops) for all addresses configured in the pool.
The range is 1 to 255.
Step 5 Click Submit to save your settings.
The list of multicast addresses that have been currently configured for specific programs is displayed in
the Multicast Address table. The User Specified column displays true if the user has already specified
the particular address for a program.
Viewing Programs
The Programs Table page lists all of the programs defined in your CDS network. Programs can be
defined through the CDSM or through an API.
The Programs Table page allows you to view scheduled programs by day, week, month, or year. You can
sort and filter programs by name, type, or schedule. You can also preview live programs while they are
playing. See the “Previewing a Program” section on page 5-41 for more information.
To view all the programs defined in your CDS network, follow these steps:
Step 1 Choose Services > Live Video > Live Programs. The Programs Table page displays with a list of all
the programs that have been defined through either the CDSM or the Program API.
Step 2 Click the Day, Week, Month, or Ye a r tab to view the playback schedules. Scheduled programs are listed
by start time (initial start time plus any repeat intervals). Times begin with the current device time
(current system time plus device time zone offset).
The Unscheduled tab displays all unscheduled programs defined in your CDS network. The All tab
displays all the programs defined in your CDS network. The Programs Table page opens to the All view
by default.
Step 3 Sort columns by clicking the column heading. You can also combine filtering conditions. For example,
you can filter only Windows Media live programs and then choose the Week tab to view the week of
November 23 to November 29, 2007. Table 5-16 describes the information that is displayed in this page.
Table 5-16 Programs Table Page Information
Item Description
Tabs
Day/Week/Month/Year Lists programs based on their schedule. The current day, week,
month, or year is displayed by default. You can navigate to the next
or previous day, week, month, or year by clicking the back or
forward arrows on either side of the date.
Unscheduled Lists only programs with no schedule defined.
All Lists all programs. This is the default view.