Specifications

5-33
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 5 Configuring Services
Configuring Programs
Step 10 Click Submit to save the settings.
Step 11 From the left-panel menu, choose Schedule. The Schedule page is displayed.
Step 12 Click the Play Forever radio button to have the program play continuously.
Alternatively, click the Schedule Playtime radio button to schedule up to ten different playtimes. The
Playtime Editor is displayed in the page.
To edit an existing playtime, click the Edit icon next to the Initial Start Time.
To delete an existing playtime, click the Trash icon next to the Initial Start Time.
Step 13 Enter the settings for the playtime as appropriate. See Table 5-12 for a description of the fields.
Content Acquirer Port The port number on the Content Acquirer that will receive the stream.
Note To activate failover support for the Content Acquirer, you must
enter zero (0).
Multicast Address and Port The multicast address and port to use for streaming this program using
multicast. The address range is 224.0.0.0 to 239.255.255.255. The port
number range is 1 to 65535. These values must be unique within the
system.
Note Auto Select is a Release 2.0 feature. Click Auto Select to select
a multicast address from the Multicast Address pool. See the
“Configuring a Multicast Address Pool” section on page 5-38 for
more information.
1. The Incoming Live Streams Settings section is new for Release 2.2.
2. The Live Streams section is for Releases 2.0 and 2.1. You can define up to ten live streams for each Movie Streamer live
program. Movie Streamer programs can have more than one live stream (audio, video, and slides).
Table 5-11 Movie Streamer Live Stream Settings Fields (continued)
Field Description
Table 5-12 Playtime Fields
Field Description
Start Playback on The start date and time for the program.
UTC or SE (Local) Time Which clock the start time should use, UTC or SE local.
Duration The length of the program. In the drop-down list, choose minutes, hours, or
days as the unit of time.
Repeat Frequency The repeat frequency has the following options:
• Do Not Repeat—Plays once.
• Repeat Every—Repeats every so many days, hours, or minutes.
• Repeat Weekly—Repeats at the same hour on the days you choose.
Repeat Forever
Repeat Until
These fields display when Repeat Every or Repeat Weekly are chosen for
Repeat Frequency.
Repeat Forever repeats the program forever using the repeat frequency set
in the previous fields.
Repeat Until repeats the program based on the repeat frequency set in the
previous fields and until the date and time specified in this field.