Specifications

5-31
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 5 Configuring Services
Configuring Programs
Table 5-11 Movie Streamer Live Stream Settings Fields
Field Description
Origin Server SDP File URL The URL for the Session Description Protocol (SDP) file generated on
the encoder. From the drop-down list, select either rtsp or http, and enter
the remainder of the URL in the field. The remainder of the URL format
is host [:port]/[filename], where the port and filename are optional. For
the Darwin Streaming Server encoder, you need to specify the SDP file.
For the Digital Rapid encoder, you do not need to specify the SDP file.
In Release 2.2, when you click the Auto Populate button, the Incoming
Live Streams Settings fields (the next section on the Live Streaming
Settings page) are automatically populated based on the Origin Server
SDP File URL
Note In Releases 2.0 and 2.1, the Content Acquirer port must be zero
(0) if the source is multicast push.
Backup SDP URL The backup URL for the SDP file. This field is only for RTSP. Add a
valid backup URL and click Auto Populate. The Incoming Live Streams
Settings backup fields (the next section on the Live Streaming Settings
page) are automatically populated based on the Backup SDP URL
The Cisco CDS only supports failover between a primary Content Origin
server and a backup Content Origin server for a Movie Streamer live
program when the backup Content origin server uses the same codec as
the primary.
In Release 2.2, when you click the Auto Populate button, the Incoming
Live Streams Settings fields (the next section on the Live Streaming
Settings page) are automatically populated based on the Backup SDP
File URL
Note This is a Release 2.2 feature.
Incoming Live Streams Settings
1
Note Manually enter these fields when Auto Populate cannot parse the SDP URL.
Primary Source Server The stream source IP address.
Backup Source Server The backup stream source IP address.
Primary Receiving IP For RTSP, the Primary Receiving IP is the IP address of the Content
Acquirer acting as the primary receiver. This is always unicast-in.
For HTTP, the Primary Receiving IP is the multicast-in IP address used
to broadcast the live stream.
Backup Receiving IP For RTSP, the Backup Receiving IP is the IP address of the Content
Acqurier acting as the backup receiver. Both the primary and backup
Content Acquirer are located in the root location of the delivery service.
For HTTP, the Backup Receiving IP is the multicast-in IP address used
to broadcast the live stream.
Receiving Ports Receiving ports are used to define each port related to audio and video
streams.
Outgoing Live Streams Settings