Specifications

5-28
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 5 Configuring Services
Configuring Programs
c. Click Submit to save the settings.
Step 3 From the left-panel menu, choose Assign Service Engines. The Service Engine Assignment page is
displayed (Figure 5-13).
Figure 5-13 Service Engine Assignment Page
Step 4
Click the Assign icon (blue cross mark) next to the SE you want to assign to this delivery service. Or, in
the task bar, click the Assign All Service Engines icon. The SE assignment states are described in
Figure 5-14.
Figure 5-14 SE Assignment State
A green arrow wrapped around the blue cross mark indicates an SE assignment is ready to be submitted.
To unassign an SE, click this icon.
Step 5 From the Assign Content Acquirer drop-down list in the task bar, choose an SE to be the Content
Acquirer for this live delivery service.
The list contains all SEs currently assigned to the delivery service.
Step 6 Check the Primed check box for each SE you want to prime with the live stream. For more information
about priming, see the “Priming a Live Delivery Service” section on page 5-34.
Step 7 Click Submit to save the SE and Content Acquirer assignments.
A green circle with a check mark indicates an SE is assigned to this delivery service. To unassign the
SE, click this icon, or click the Unassign All Service Engines icon in the task bar. Click Submit to save
the changes.
New Assign
Assigned and
waiting for
Submit
Assignment
Submitted
Not modifiable. The quota on
all the delivery services for this
SE exceeds the disk space
Unassign
Submitted
Assignment